Jump to content

Tuudi

Members
  • Content Count

    78
  • Joined

  • Last visited

  • Days Won

    14

Everything posted by Tuudi

  1. As far as I know there's single pressure sensor in the mouse which is only able to differentiate left and right sides, so if your holding right mouse button you'll trigger the right finger tip buttons deep click easier, as well the middle mouse clicks, and vise versa.
  2. These are from the Z backers facebook page. I didn't make them but I guess why not to share them over here too.
  3. It might be that instant is just too fast execution for the program you are using the loop with, so adding an other wait command before the repeat might fix this, like 10ms wait or you could even try 1ms but that propably wouldn't change the behavior from current much.
  4. You could have the "tab" as tap there as it does the same thing as press and release, that would be the more effecient way to do it by the on board memory wise. Also even though there is failsafe for releasing held down buttons/keys in the mouse it would be propper practice to have a release output for buttons/keys unless you intentionally want/need to have buttons held down even after you release the physical button pressed. But having alt release in the release of your current setup propably would not work as you intended any more. You could also just remove the left click from the release and use the actual left click as you have the alt tab set to right side, or you could use one of the fingertip buttons with deep click. Regular click = previous window, deep click = selecting which window to make active
  5. You can make multiple DPI levels with seperate X and Y axes in profiles settings and then apply the levels to button press and release. (sadly you can't go to zero DPI, 100 is the lowest) And here the bottom thump button will use the level 2 setting when pressed and go backto level 1 when it's released:
  6. Well first off seems that the second example would require wait commands between each output to have it work out properly. As for your last question about running 2 repeat action in one button press, it seems you can only use one repeat in any given "command line", so you'd have to have every a -key press set seperately so you could have the one repeat run the "command line" indefinetely.(untill broken by stop looping command) You'd need to have one button set like this: Also to answer the last question in the first post that I missed, setting alt+tab like this let's you use mouse movement: (alt is set to press in button press while tab is only taped, alt will be released on button release)
  7. Well here are the exaples you've given hope these help you out to figure how to do the rest of configuring yourself. 4 rmb taps + key + rmb tap Right click and selecting the second option from drop menu.("right click" and "enter" will select the first option)
  8. Version 1.0.1

    114 downloads

    My personal all around game profile to play basically anything. The thumb buttons don't have anything bind to them as i prefer to use them for voice chat and other stuff, which can be checked from my desktop profile.
  9. So I had a little go around with few games and so far it could be that for some reason your steam controller is using it's desktop setup in LOH: TCS 2 which is sure to default the controller to swiftpoint z, you could try to make a specific steam controller scheme for it or as last resort try if switching out the desktop setup into controller would correct this.
  10. Is this happening with every game you try to play with controller or a specific one? I too have steam controller, but haven't noticed it being interfered by the Z. Have you tried to enable support for different controller types in the controller general settings, as some games do not natively support steam controller?
  11. Here the left finger tip button will tap ones the letter x when clicked, while deep clicked it will keep taping letter z while deep click is active and skip the letter x when released. Hope this helps you out.
  12. Here is what it should look like in the driver to make your given example.
  13. Those were only for the kickstart and indiegogo backers as a reward for backing the project and they will not be sold seperately any where. Unless some backer wants to part with theirs.
  14. Have you tried using the mouse with 3 fingers insted of the standard 2 finger style? If you use edge buttons with index, left button with middle, and right button with ringfinger you should be able to reach the right side rest with your pinky. When I started using the Z I too started with the standard style and were bit annoyed that the right side rest was too short to reach pinky, though I started to try different ways to hold the mouse to get the best grip to it and now that I've been using it with the 3 finger style I don't think I'll ever use the mouse any other way, it dosen't just give better grip for the mouse but also allows more versatile botton use. Just my two cents on the matter, as the mouse should be customizable to fit practically anyones needs I don't see why there couldn't be extension to the rest for those who insist on using the mouse the standard way.
  15. Version 1.1.0

    90 downloads

    This profile lets keyboard shortcuts to be executed using just the Z, it also includes media player controls, basic browser controls and Z setting functions.
×
×
  • Create New...