Jump to content

Mac installation

Recommended Posts

Initially worked on Mac (Mojave) with a couple of simple configurations for specific work software. I then connected to a PC to try with other work software with a couple of simple configurations and also worked. I think PC asked me to update firmware (system now says 

Reconnected to Mac (latest Mojave) and I cannot get it to work. When I try to start driver I receive message “Mouse has newer firmware. The connected mouse already has a newer version of the firmware. Please update driver”. Cannot get any further. 

I have downloaded driver again, updated BTT, tried to reset mouse, etc. 

Advice appreciated. Thank you. 

Share this post

Link to post
Share on other sites

According to their Mac driver package, you need to re-flash the firmware with the config that came with the Mac driver package. The profile provided with the Mac driver package have a special mapping that only works with the BTT config they provided, other settings will need adjustments to the BTT config.


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...